Hydroseal is designed for waterproofing all types of concrete surfaces such as concrete roof, foundation walls, basement and retaining walls. Mixed with power part and fully reinforced with fabric, it forms a hard-wearing, and flexible waterproofing system. It is a fluid applied waterproof System for roof & basement that allows design professionals to create seamless waterproof systems which have no accessories and no leakage points, 6 years renewable warranty.
Recover and New concrete roof waterproofing
Gutter of metal roof Flat and low-pitched roof waterproofing, including BUR, concrete, EPDM, Hypalon, modified bitumen, PVC, and TPO Parapet wall & Exterior wall waterproofing
Mixing:
Hydroseal slurry is prepared by mixing Hydroseal liquid part and power part together. Add Hydroseal liquid part to a clean 5-gallon pail and mix with a slow-speed mechanical mixer. Slowing add the power part until a totally homogenous and lump-free slurry is produced. The mixed slurry must be run out in 6 hours.
Apply a 6“or 12”wide strip of ROOFMATE Base coat, Fabric, and base coat over corner, cracks and joints.
Apply one coat of Hydroseal slurry to the substrate, ROOFMATE fabric lay into the wet Hydroseal slurry, finally a second coat of Hydroseal slurry saturating the fabric from above,making sure there are no wrinkles or air pockets.Overlap fabric is about 4 inches.
Let it dry at lease 12 hours. Apply the Barrierseal slurry to the treated area one more time.
Hydroseal slurry should only be applied with roof brush. Rolling and spraying of Hydroseal slurry are absolutely forbidden.
Coverage
Hydroseal coat =400sqf/5gal/coat ,total three coats.
Clear UP
Thoroughly clean and rinse application equipment with fresh water
Warranty
6 year renewable
Standard Hydroseal system (one coat Hydroseal slurry +Roofmate Fabric+ one coat Hydroseal slurry e +one coat Hydroseal slurry), Total Roofmate dry thickness should be a minimum of 1.30 mm (0.05inches ). system(one coat Hydroseal slurry+Roofmate Fabric+one coat Hydroseal M slurry e+one coat Hydroseal slurry), Total Roofmate dry thickness should be a minimum of 1.30 mm (0.05inches ).
Enhanced Hydroseal system (one coat Hydroseal slurry +Roofmate Fabric+ one coat Hydroseal slurry e+ one coat Hydroseal slurry+ one coat Hydroseal slurry), Total Hydroseal dry thickness should be a minimum of 1.70 mm (0.07inches).
Plusworld Roofing is an indigenous roof specialist and consulting company. We work with dedication and integrity, and strive for a position of leadership in the roofing industry.